How to program IR signal from TV remote to STB remote

ㆍHow to program IR signal from TV remote to STB remote 

 

There is a separate button on the supplied remote control so that it can be used by connecting the power button of the TV remote control.
By connecting the TV remote control, you can turn off the TV through the supplied remote control without using the TV remote control when turning the TV on or off.
Each remote control has its own key value.
This is a method of copying the key value of the TV remote control and copying it to the supplied remote control.
In the market, these products are referred to as learning remote controls or universal remote controls.

 

1. Place the remote control facing each other as shown in the picture.

2. If you press and hold the TV button on the top right of the existing remote control for 10 seconds, the remote control lights up in red as shown in the picture.

3. If you press the TV button on the right side of the supplied remote control once more, the red light flashes and the mode changes to the mode where you can copy the key value of the power button on the TV remote control.

4. If you press and hold the power button on the TV remote control once, the red light flashes quickly 3 times and stops.

5. Press the OK button on the built-in remote control to complete the key value copy operation.